skip to Main Content
1-760.444.5995 Ex. 1 sales@raveon.com

Mobile/Vehicle RF Antennas

The following is a list of mobile/vehicle radio antennas that work well with Raveon’s M7 series of tracking radios.

For a complete systems quote contact us now.

5/8 wave base loaded antenna, 450-470MHz, 200 Watts, 3dB Gain.

Frequency Range 450-470
Connector Type None
Gain 3 dB
Power (watts) 200
Whip Material Stainless Steel
Whip Length 16″ @ lowest frequency
Base Style NMO Style
Mount Style None

 

Mount not included

5/8 wave over 1/2 wave base loaded closed coil antenna, 450-470 MHz, 200 Watts, 5dB Gain

Frequency Range 450-470
Connector Type None
Gain 5 dB
Power (watts) 200
Whip Material Stainless Steel
Whip Length 32″ @ lowest frequency
Base Style NMO Style
Mount Style None

Mount not included

 

Economical 1/4 wave antenna, 450-470 MHz, 150 watts, Unity Gain, Chrome

Frequency Range 450-470
Connector Type None
Gain 0 dB
Bandwidth Same as Freq Range
Power (watts) 150
Whip Material Stainless Steel
Whip Length 7-3/8″
Base Style NMO Style
Mount Style None

Mount not included

 

The RT-AN-MU3 is a 1/4 wave UHF whip antenna for installation on the metal roof of vehicles with Raveon’s GPS tracking transponders in them. This antenna is used for sending and receiving the UHF signals. You will also need a GPS receiver antenna.

To install this antenna, you will also need an NMO mount. The NMO mount has the coax cable on it that will connect to the antenna. A hole is drilled in the roof of the vehicle, and the NMO mount is secured into the hole. This RT-AN-MU3antenna whip is then screwed onto the NMO mount onto the roof of the vehicle being tracked.

Back To Top